Payment & Shipping Terms:
|Material:||Carbon Steel Q345/ Q235||Length:||30 Ft|
|Axle No.:||4||Design Type:||Draw Bar Trailer With Bogie Suspesnion|
30ft Draw bar skeleton trailer with log pillars for small logs
A logging truck or timber lorry is a large truck used to carry logs.Some have integrated flatbeds, some are discrete tractor units, and some are configured to spread a load between the tractor unit and a dollied trailer pulled behind it. Often more than one trailer is attached.
There are two main types of modern logging trucks — those used on rough ground and trails in the forest where they are felled and those used for transport on normal highways and roads. Because the roads in forests are rough and often temporary, the suspension and tires of an off-road truck are especially significant. Solid, low pressure and high pressure tires have been used. As many as nine axles may be used to provide low ground pressure and good traction.
|30ft Draw bar skeleton trailer with log pillars for small logs||6404LOG-B|
|Draw Bar Log Trailer
overall outside dimension(mm)
|Outside dimension of Drop Side body(mm)||Length|
|Tanker Semi-trailer capacity(L)|
|Draw Bar Log Trailer GVW(kg)||69500|
|Draw Bar Log Trailer vehicle Tare Weight(kg)||9500|
|Draw Bar Log Trailer rated payload(kg)||60000|
|Draw Bar Log Trailer Wheel base(mm)||6350+1300|
|Tread(mm)||Tread at front|
|Tread at rear||1820/1820|
|Rated payload of Vehicle saddle||10800|
|Draw Bar Log Trailer Axle Capacity kgs||15000/15000|
|Trailer Material||Carbon Steel|
|Transport Material :||Coil Material|
|ISO Container Twist Locks||0|
|Tnaker Insulated Cover||nile|
|Suspension System||Both Bogie suspension|
|Leaf Spring Mechinical system||12/12|
|Side Log Pillars Holder||1200*6 sets|
|Options: Capacity 30T - 45T|
Material:High strength low alloy steel with 350 MPa yield strength is used for welded I-beam and 235 MPa in other fabricated parts.
Main Beams: 500m deep x 146mm wide x 8mm web welded I-section main beams,Top Flange 14m thick, Bottom Flange 16m thick.
Floor:3mm thick checkered steel plate.
|OEM Parts Configuration:
Turn Table: 25T grade made in China
Tractor Hook: QYH001,Made in China.
Suspension:Mechanical suspension with 11 / 10/ 8/7 leaf spring (W100mm x T12mm per leaf). options: Bogie Suspension, Air Spring Suspension
Axles: square axle with 12 tons capacity. Supplier & type: BPW/ FUWA/SAF/L1. Made in China..
Rims: 10 Holes ISO. Made in China. Option By the Factory..
Tires: 11R22.5 OPTIONS: 12R22.5, 315/80R22.5,385/65R22.5 , Triangle Brand , Made in China. Option By the Factory..
Brake System: Dual air brake system, Wabco relay emergency valve, OPTIONS: ABS. Option By the Factory.
Brake Chamber: 30 type on front axle.30/30 type on other axles,
Electrical System: Complete 24V installation with modular wiring harness. 7 pole plug placed at front in accordance to ISO, norms NO.1185.
Side Lights: reflectors (orange);
Rear Lights: direction indicators (orange) /brakes (red)/rear warning (white).
Spare Tire Carrier: Equipped two sets per chassis without spare tire.
Side Guard: Steel.
Tool Box: Equipped one set.
Painting: Color by customer’s requirement.
Marking: By customer’s requirement.
Options: Oil Tanker: 300L carbon steel.