Payment & Shipping Terms:
|Material:||Carbon Steel Q345/Q235||Tanker Volume:||12,000L|
|Axle No.:||2||Transport Liqulid:||Concrete|
12 CBM Concrete Mixer Tanker Semi Trailer for Construction Material
concrete mixer Special concrete transport trucks (in-transit mixers) are made to mix concrete and transport it to the construction site. They can be charged with dry materials and water, with the mixing occurring during transport. They can also be loaded from a "central mix" plant; with this process the material has already been mixed prior to loading. The concrete mixing transport truck maintains the material's liquid state through agitation, or turning of the drum, until delivery. The interior of the drum on a concrete mixing truck is fitted with a spiral blade. In one rotational direction, the concrete is pushed deeper into the drum. This is the direction the drum is rotated while the concrete is being transported to the building site. This is known as "charging" the mixer. When the drum rotates in the other direction, the Archimedes' screw-type arrangement "discharges", or forces the concrete out of the drum. From there it may go onto chutes to guide the viscous concrete directly to the job site. If the truck cannot get close enough to the site to use the chutes, the concrete may be discharged into a concrete pump, connected to a flexible hose, or onto a conveyor belt which can be extended some distance (typically ten or more metres)
|12 CBM Concrete Mixer Tanker Semi Trailer for Construction Material||9122GJB|
overall outside dimension(mm)
|Tanker Body Capacity(L)||12000L|
|Tanker Body Compartments|
|Tanker Semi-Trailer GVW(kg)||47000|
|Tanker Semi-Trailer vehicle total weight(kg)||12000|
|Tanker Semi-Trailer rated payload(kg)||35000|
|Tanker Semi-Trailer Wheel base(mm)||5200+1350|
|Tread(mm)||Tread at front||1830|
|Tread at rear||1830|
|Tanker Semi-Trailer Rated payload of Vehicle saddle||16000|
|MAIN SPECIFICATION OF 12 CBM MIXER|
|Agitating Capacity||12 m3|
|Drum Rotating Speed||0-16 r/min|
|Water Tank Volume||400 liters or 600 liters|
|Discharged remain ratio||< 0.2%|
|Agitator||The material of the Agitator is the mix steel||B520JJ|
|Thickness of the tank body (mm)||End plate cover||8|
|Front Conical parts||5|
|Rear Conical parts||5|
|over length (mm)||5250|
|Max. Diameter (mm)||2360|
|Academic volume (m3)||18.7|
|Agitator mixing cubage (m3)||12|
|Agitator leaning angle (°)||11|
|Agitator rotation speed (rpm)||1-12|
|Feeding speed (m3/min)||≥3|
|Discharging speed (m3/min)||≥2|
|Surplus rate (%)||≤0.5|
|Water tank volume (L)||400|
Material:High strength low alloy steel with 350 MPa yield strength is used for welded I-beam and 235 MPa in other fabricated parts.
|OEM Parts Configuration:
King Pin: 3.5” /2” JOST.
Landing Gear: 2 speed road side winding with sand shoe,Type: JOST C200T.
Suspension:Mechanical with 11 / 10/ 8/7 leaf spring (W100mm x T12mm per leaf). options: Bogie Suspension, Air Spring Suspension
Axles: square axle with 12 tons capacity. Supplier & type: BPW/ FUWA/SAF/L1.
Tires: 11R22.5 OPTIONS: 12R22.5, 315/80R22.5,385/65R22.5 , Michelin,BRIDGESTONE,Double Coin,Tri-angle
Brake System: Dual air brake system, Wabco relay emergency valve, OPTIONS: ABS.
Electrical System: Complete 24V installation with modular wiring harness. 7 pole plug placed at front in accordance to ISO, norms NO.1185.
Spare Tire Carrier: Equipped two sets per chassis without spare tire.
Side Guard: Steel.
Tool Box: Equipped one set.
Painting: Color by customer’s requirement.
Marking: By customer’s requirement.
Options: Oil Tanker: 300L carbon steel.