Payment & Shipping Terms:
|Material:||Carbon Steel Q345/ Q235||Length:||26 Foot|
|Axle No.:||2||Design Type:||Draw Bar Trailer|
30ft 3 axles Closed steel box Draw Bar full Trailer for bulk cargos and mine material
A Draw bar trailer or full trailer is a term used for a freight trailer supported by front and rear axles and pulled by a drawbar. In Europe this is known as an A-frame drawbar trailer. A full trailer is a towed vehicle having at least two axles, and equipped with a towing device which can move vertically in relation to the trailer and controls the direction of the front axle(s), but which transmits no significant static load to the towing vehicle.
|30ft 3 axles Closed steel box Draw Bar full Trailer for bulk cargos and mine material||6303XXY-GB|
|overall outside dimension(mm)||Length||7500|
|Draw Bar and Tripod Length||2875|
|Outside dimension of Drop Side body||Length||5635|
|Material Thickness of the Box||Floor||5mm|
|vehicle total weight(kg)||7500|
|Tread(mm)||Tread at front||1820|
|Tread at rear||1820/1820|
|Rated payload of Draw Bar Eyes (KN)||250|
|Trailer Material||Carbon Steel|
|Optional Front Gantry and the right protection, ABS: WABCO; section size groove 150 × 75mm higher off the ground 500mm. With Wabco Brake.|
Material:High strength low alloy steel with 350 MPa yield strength is used for welded I-beam and 235 MPa in other fabricated parts.
Main Beams: 500m deep x 146mm wide x 8mm web welded I-section main beams,Top Flange 14m thick, Bottom Flange 16m thick.
Floor:3mm thick checkered steel plate.
|OEM Parts Configuration:
Suspension:Mechanical suspension with 11 / 10/ 8/7 leaf spring (W100mm x T12mm per leaf). options: Bogie Suspension, Air Spring Suspension
Axles: square axle with 12 tons capacity. Supplier & type: BPW/ FUWA/SAF/L1. Made in China..
Rims: 10 Holes ISO. Made in China. Option By the Factory..
Tires: 11R22.5 OPTIONS: 12R22.5, 315/80R22.5,385/65R22.5 , Triangle Brand , Made in China. Option By the Factory..
Brake System: Dual air brake system, Wabco relay emergency valve, OPTIONS: ABS. Option By the Factory.
Brake Chamber: 30 type on front axle.30/30 type on other axles,
Electrical System: Complete 24V installation with modular wiring harness. 7 pole plug placed at front in accordance to ISO, norms NO.1185.
Side Lights: reflectors (orange);
Rear Lights: direction indicators (orange) /brakes (red)/rear warning (white).
Turn Table: 25T grade made in China
Spare Tire Carrier: Equipped two sets per chassis without spare tire.
Side Guard: Steel.
Tool Box: Equipped one set.
Painting: Color by customer’s requirement.
Marking: By customer’s requirement.
Options: Oil Tanker: 300L carbon steel.
Full 3D design and Force Analysis
Best Steel chassis
Brake Stability System
Lift-up Axle System