Payment & Shipping Terms:
|Material:||Carbon Steel Q345/Q235||Length:||40 Foot|
|Axle No.:||2||Design Type:||MAFI Trailer|
container skeletal trailer,
container transport trailer
40 feet Flatbed Roller Trailer Mafi Trailer for 50T capacity for roll roll shipment
The Roller Trailer_Mafi Trailer is designed for use in stevedoring and transporting of 1x40ft or 2x20 ft ISO cargo containers or loose cargo or big non knocked-down goods on Ro-Ro vessels or within terminal.
Length: 12,461 mm±10mm (approximate)
Width: 2,600 mm ±10mm (including mud guard)
Height: 741mm @ unload (without twist locks)
(The above dimension will be adjusted according to other specification.)
Tare Weight: approximate 11,500 kg
Max. Payload: 50,000 kg
Material: High strength low alloy steel with 350 MPa yield strength is used for welded I-beam and fabricated parts.
OEM Parts Configuration:
● 2 rock arms lowered box construction
● 4 axles 140x140,φ100/80mm
● Taper roller bearings 30216 – 8 pieces, 32020 – 8 pieces
● 8 steel reinforced solid rubber tires 22”x16”x16”
● 4mm thickness checkered steel floor plate.
Spare Tire Carrier: None
Side Guard: None
Tool Box: None
Marking: GET standard, Technical data plate including chassis no, dead weight, year of manufacturing etc. to be fitted
Painting: Color by customer’s requirement.
1) All the details not mentioned above should comply with Chinese regulations.
2) These specifications are given as information. We reserves its right to change them without previous notice.
3) We does not supply any certificate for this product.
|Trailer Main beam||Deep: 450 mm (17.7")
Auto-welt Main Beam With High strength low alloy steel with 350 MPa yield hot-rolled I-beam (Q345)
|Flatbed Trailer Floor||1/8" (3mm) Thickness ASTM A572 grade 50 Checked Steel Plate
Options: 1/5" ( 5mm)
|Kingpin Upper coupler||1/4” pick up plate with JOST 2” diameter square type king pin per SAE standard|
|Flatbed Front Bolster||ASTM A572 grade 50 steel U form channel with 7'' wide x 6'' high x 5/16 thick open section, 3/8'' top plate|
|Rear Bolster||ASTM A572 grade 50 steel U form channel with 7'' wide x 7'' high x 5/16 thick open section, 3/8'' top plate|
|Rear Bumper||100x100mm (4” x 4” ) square tube step with taper “H” section vertical member|
|Bar is welded to uprights and main beam.|
|Container Twist lock||8 Sets||1x40ft Container and 2x20ft Container|
|Landing gear||Jost Or CIMC Brand 28T two speed telescopic manual landing gear|
|Crank handle is located on the driver’s side of the chassis.|
|Trailer Suspension||Mechanical tandem suspension with 3-leaf springs.
Options: Air Spring Suspension , Bogie Suspension
|Axles||150mm (6") Square axles with 13T/15T/16T/20T capacity, 10 HUB piloted hubs with outboard mounting cast steel drum (ABS Options) Option : Disc Type
Manufacturer: FUWA ,Options: BPW,SAF
|Wheels||steel disc wheel, 10 holes ISO, ; Option: Aluminum alloy rim|
|Tires||Tubeless Tires , 8.25R15,8.25R20,11.00R22.5,12.00R22.5,12.00R20,385/65R22.5,425/65R22.5 ,
Manufactuter: Double Coin, Triangle, Michelin, Firestone
|Brake System||Dual line pneumatic brake, SAE hose and connector, WABCO relay emergency valve, OPTIONS: ABS brake system|
|T30/30 spring brake chambers, T30 brake chambers|
|3/8” blue air tube for control and 3/8” red for supply, 40L air tanks|
|Electrical||OPTRONICS 12-volt LED lighting with Phillips mold seal wiring harness, meet DOT and SAE standards.
Receptacle::7 way socket SAE standard, China
Wiring: Electric cable protected by PVC conduit on main frame
|Painting||Electrophoretic spraying, that is, water-based coating, can be dissociated into a water-soluble film-forming material which can form a film in water, and swims to the opposite electrode in a direct current electric field, and precipitates on the surface of the object to form a coating film|
|MISC||GET standard marking, document holder, conspicuity tape, Steel or black rubber mud flaps|
|Option||Hubodometer, PSI tire inflation system|
Contact Person: Mr. HApple Hoo